Grid Connect

USB CAN Interface - CAN USB COM

Part Number: GC-CAN-USB-COM

MPN: GC-CAN-USB-COM

Your Price From:
List Price: $149.95
Your Price: $145.95

Availability: In Stock: Ships same or next business day

Contact us about customizing this product for individual applications

* Required Fields

Your Price From:
List Price: $149.95
Your Price: $145.95

* Required Fields

USB CAN COM Adapter  Image Tilted

Click on image to zoom

More Views

30 Day Returns
  • Description
  • Features
  • Specs
  • Documentation & Drivers
  • Reviews
  • Q&A
  • Made in the USA

    The new CAN-USB-COM converter provides bi-directional communication between a USB “COM Port” Serial interface and a CAN 2.0A/B (ISO 11898) Network. This new USB CAN interface is completely backward compatible with our prior CAN-USB-LIGHT version, while adding improved performance and more features.

    The new USB CAN interface offers the following features:

    • Backwards Compatibility with the previous version (CAN-USB-LIGHT)
    • 25 times faster with new ARM Cortex-M3 32-bit microcontroller
    • Easy setup using “Configuration Push Button”
    • Virtual Serial Baud Rates up to 1 Mbps
    • CAN Messages can now be formatted in either ASCII or binary
    • Help menu is integrated for set-up/configuration commands.
    • Automatic set-up of “bit-time” and “slew rate” (may be adjusted through configuration commands).

    With a wide variety of settings and configuration parameters this USB CAN Interface creates a powerful solution for interfacing between a Virtual USB COM Port and Controller Area Network (CAN). When plugged into a USB port, the CAN-USB-COM will enumerate as a serial COM Port. This means you can use it with any COM Port based software, including HyperTerminal or TeraTerm. Drivers are standard in Windows XP and later, and are available for MAC and Linux.

    NOTE: The CAN USB COM is NOT compatible with Peak System software.

    • Backwards Compatibility with the previous version (CAN-USB-LIGHT)
    • Simple configuration using HyperTerminal or TeraTerm
    • 1000V isolation (Optional)
    • 10 message transmit buffer, 2 message receive buffer
    • LEDs for Serial TX and RX, CAN TX and RX
    • Test Features: can be used to generate CAN Square wave to measure propagation delay and evaluate bus termination.
    • Powered from USB Port
    • Uses FTDI USB to Serial Chip


    CANbus Features:

    • Compatible with CAN 2.0A (11-bit ID standard) and/or 2.0B (29-bit ID extended)
    • Baud rates up to 1Mbaud, CIA DS-102 pinout (H=7, L=2, GND=3)

  • Manufacturers Part Number GC-CAN-USB-COM
    Power Supply Powered from USB Port (No Power Supply Necessary)
    Indicators (LED)
    • RS232: TX & RX activity
    • CANbus: TX & RX activity
    • Power: Power On
    Baud Rate Serial Baud Rate USB Virtual COM Port: 100 to 1000000
    Pinout CAN Network Port: C.I.A. DS-102 (CAN_H = 7, CAN_L = 2, CAN_GND = 3)
    Receive Message Buffer
    • Virtual COM RS232 Serial Port: 2 Messages
    • CAN Network: 10 Messages
    Transceiver CAN Network Port: ISO1050 CAN Transceiver up to 1 mbit/s
    Slew Rate Adjust
    • Range: MIN >= 2.5 V/µs, MAX <= 20 V/µs
    • Method: Adjustable via potentiometer and screwdriver
    Connector(s)
    • CAN Network: Male DB9
    • USB: Standard USB-A Male Connector
    Isolation 5000 VRMS for ISO1050DW and 2500 VRMS for ISO1050DUB and ISO1050LDW (Optional)
    Temperature Range Operating: -40°C to +85° C
  • The new CAN-USB-COM converter provides bi-directional communication between a USB “COM Port” Serial interface and a CAN 2.0A/B (ISO 11898) Network. This new USB CAN interface is completely backward compatible with our prior CAN-USB-LIGHT version, while adding improved performance and more features.

    The new USB CAN interface offers the following features:

    • Backwards Compatibility with the previous version (CAN-USB-LIGHT)
    • 25 times faster with new ARM Cortex-M3 32-bit microcontroller
    • Easy setup using “Configuration Push Button”
    • Virtual Serial Baud Rates up to 1 Mbps
    • CAN Messages can now be formatted in either ASCII or binary
    • Help menu is integrated for set-up/configuration commands.
    • Automatic set-up of “bit-time” and “slew rate” (may be adjusted through configuration commands).

    With a wide variety of settings and configuration parameters this USB CAN Interface creates a powerful solution for interfacing between a Virtual USB COM Port and Controller Area Network (CAN). When plugged into a USB port, the CAN-USB-COM will enumerate as a serial COM Port. This means you can use it with any COM Port based software, including HyperTerminal or TeraTerm. Drivers are standard in Windows XP and later, and are available for MAC and Linux.

    NOTE: The CAN USB COM is NOT compatible with Peak System software.

    ">
  • The new CAN-USB-COM converter provides bi-directional communication between a USB “COM Port” Serial interface and a CAN 2.0A/B (ISO 11898) Network. This new USB CAN interface is completely backward compatible with our prior CAN-USB-LIGHT version, while adding improved performance and more features.

    The new USB CAN interface offers the following features:

    • Backwards Compatibility with the previous version (CAN-USB-LIGHT)
    • 25 times faster with new ARM Cortex-M3 32-bit microcontroller
    • Easy setup using “Configuration Push Button”
    • Virtual Serial Baud Rates up to 1 Mbps
    • CAN Messages can now be formatted in either ASCII or binary
    • Help menu is integrated for set-up/configuration commands.
    • Automatic set-up of “bit-time” and “slew rate” (may be adjusted through configuration commands).

    With a wide variety of settings and configuration parameters this USB CAN Interface creates a powerful solution for interfacing between a Virtual USB COM Port and Controller Area Network (CAN). When plugged into a USB port, the CAN-USB-COM will enumerate as a serial COM Port. This means you can use it with any COM Port based software, including HyperTerminal or TeraTerm. Drivers are standard in Windows XP and later, and are available for MAC and Linux.

    NOTE: The CAN USB COM is NOT compatible with Peak System software.

    ">
You might be interested in