Dry Contact Software for SensorProbe2 enables 10 Dry Contact Inputs

Part Number: GC-AK-DCUPGSP2

MPN: DCUPGSP2

Your Price From:
List Price: $100.00
Your Price: $100.00

Availability: Usually ships the next business day

* Required Fields

Your Price From:
List Price: $100.00
Your Price: $100.00

* Required Fields

Dry Contact Upgrade

Click on image to zoom

Expert Support
  • Description
  • Features
  • Specs
  • Documentation
  • Reviews
  • Q&A
  • Authorized North America Distributor Stamp

    An optional feature of the SensorProbe2 is the ability to have up to 5 dry contact inputs per RJ45. This software upgrade gives a total maximum possible inputs of 10 per sensorProbe2 by utilizing both of the RJ45 sensor ports. You must also select one or two 5-input dry contact cables to go with your sensorProbe2.

    These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.These additional sensors are labeled as ports 3 to 12.

    • Normal input voltage is settable under software
    • Normally open, normally closed is settable under software
    • Up to 5 dry contact inputs per RJ-45 making upto 10 dry contact inputs in sensorProbe2
  • Manufacturers Part Number DCUPGSP2
    Power Supply Powered by the sensorProbe. No additional power needed.
    Measurement Rate Sensor: Open/closed contact switch
    Communications Cable RJ-45 jack to sensor using UTP CAT5 wire.
    Measurement Range Alarm or Normal
    Firmware Input Range: 0 to 5 volts, settable under software.
    Included Software Multiple readings every second.
  • An optional feature of the SensorProbe2 is the ability to have up to 5 dry contact inputs per RJ45. This software upgrade gives a total maximum possible inputs of 10 per sensorProbe2 by utilizing both of the RJ45 sensor ports. You must also select one or two 5-input dry contact cables to go with your sensorProbe2.

    These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.These additional sensors are labeled as ports 3 to 12.

    ">
  • An optional feature of the SensorProbe2 is the ability to have up to 5 dry contact inputs per RJ45. This software upgrade gives a total maximum possible inputs of 10 per sensorProbe2 by utilizing both of the RJ45 sensor ports. You must also select one or two 5-input dry contact cables to go with your sensorProbe2.

    These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.These additional sensors are labeled as ports 3 to 12.

    ">
You might be interested in