PCAN-PCI Express FD: Dual Channel

Part Number: GC-CAN-PCI-E-FD-2

MPN: IPEH-004027

List Price: $364.00
Your Price: $364.00

Availability: In Stock: Ships same or next business day

Click on image to zoom

More Views

30 Day Returns
  • Description
  • Features
  • Specs
  • Documentation
  • Reviews
  • Q&A

  • Authorized North America Distributor Stamp

    The PCAN-PCI Express FD with dual channels is able to connect a PC to a CAN FD or CAN network by using PCI Express slots. This card features 500 Volt galvanic isolation for between a computer and CAN channels.

    The device is downward-compatible to CAN 2.0 A/B standard and can be used with existing networks.

    The PCAN-PCI Express FD card with 2 channels offers the new CAN FD protocol that provides higher bandwidth for data transfers thus allowing up to 64 data bytes per CAN FD frame and transmiting the data payload with bit rates up to 12 Mbit/s.

    • PC plug-in card (PCIe x1) for PCI Express slots
    • PCIe data transfer via bus master DMA
    • DMA memory access operations with 32- and 64-bit addresses
    • Extended operating temperature range -40 to 85 °C (-40 to 185 °F)
    • 2 High-speed CAN channels (ISO 11898-2)
    • Complies with CAN specifications 2.0 A/B and FD
    • CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
    • CAN bit rates from 25 kbit/s up to 1 Mbit/s
    • Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel
    • CAN termination can be activated through a solder jumper, separately for each CAN channel
    • Measurement of bus load including error frames and overload frames on the physical bus
    • Induced error generation for incoming and outgoing CAN messages
    • 5-Volt supply to the CAN connection can be connected through a solder jumper
    • CAN FD support for ISO and Non-ISO standards switchable
    • CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 303-1)
    • FPGA implementation of the CAN FD controller
    • NXP TJA1044GT CAN transceiver
  • Manufacturers Part Number IPEH-004027
    Connector Type No
    High-Speed CAN 2 High-speed CAN Channel (ISO 11898-2)
    Power Supply Max. 200 mA, Max. 70 mA
    Interface(s)
    • PCAN-Basic
    • CAN FD
    Protocols
    • CAN FD ISO 11898-1:2015
    • CAN FD non-ISO
    • CAN 2.0 A/B
    Dimensions 121 x 114 mm (H x W)
    Product Weight 66 g
    Storage Specifications
    • Storage Temperature: -40 to 125 °C ( -40 to 257 °F)
    • Relative Humidity: 15 - 90 %, not condensing
    Transceiver NXP TJA1044GT
    EMC Directive
    • Directive 2014/30/EU
    • DIN EN 55024:2016-05
    • DIN EN 55022:2011-12
    Controller(s) FPGA implementation
    Connector(s)
    • PCI Express x1 (1 lane)
    • D-Sub (m), 9 pins Pin assignment according to specification CiA® 303-1
    Temperature Range Operational Temp: -40 to 85 °C (-40 to 185 °F)
  • The PCAN-PCI Express FD with dual channels is able to connect a PC to a CAN FD or CAN network by using PCI Express slots. This card features 500 Volt galvanic isolation for between a computer and CAN channels.

    The device is downward-compatible to CAN 2.0 A/B standard and can be used with existing networks.

    The PCAN-PCI Express FD card with 2 channels offers the new CAN FD protocol that provides higher bandwidth for data transfers thus allowing up to 64 data bytes per CAN FD frame and transmiting the data payload with bit rates up to 12 Mbit/s.

    ">
  • The PCAN-PCI Express FD with dual channels is able to connect a PC to a CAN FD or CAN network by using PCI Express slots. This card features 500 Volt galvanic isolation for between a computer and CAN channels.

    The device is downward-compatible to CAN 2.0 A/B standard and can be used with existing networks.

    The PCAN-PCI Express FD card with 2 channels offers the new CAN FD protocol that provides higher bandwidth for data transfers thus allowing up to 64 data bytes per CAN FD frame and transmiting the data payload with bit rates up to 12 Mbit/s.

    ">
You might be interested in