xPico-MB - Modbus Network Module

Part Number: GC-XPICO-MBTCP-MB

MPN: GC-XPICO-MBTCP-MB

List Price: $29.00
Your Price: $24.00

Availability: In Stock: Ships 1 -2 business days

Xpico Modbus Network Device Server Module

Click on image to zoom

Expert Support
  • Description
  • Features
  • Specs
  • Documentation
  • Reviews
  • Q&A
  • The incredibly small and low cost xPico-MB, provides the power of an Xport-MB with the lower price point of a chip solution. It is perfect for integrating industrial Ethernet connectivity onto an existing design with a serial interface, as it adds full serial port control and supports bridging for Modbus TCP, ASCII, and RTU. In contrast with the Xport-MB, the xPico-MB has more flexible mounting options using a SMT Connector and external Ethernet interface.

    Unlike a chip solution, the Xpico-MB product requires fewer engineering hours and includes a full IP stack, web server and a complete Modbus protocol bridge application.

    To evaluate both the hardware and Modbus software of the xPico-MB module, use the xPico Evaluation Kit. Just swap the included xPico module with the xPico-MB module. To evaluate just the Modbus software, the xPico-MB is used in the Net232+ Modbus RS232 Adapter.

    Grid Connect offers custom engineering services to customize the xPico-MB to your exact requirements. For more information on a custom xPico-MB solution please contact us.

  • Xpico Modbus Module Features

    • Small Footprint (24 x 16.5mm) allowing for design flexibility
    • Includes built in Modbus protocol bridge application, Web Server and Full IP Stack
    • 8 Digital General Purpose I/O (GPIO) pins accessible via Modbus/TCP
    • Serial Data Speeds up to 115 Kbps
    • Extended Temperature Range: -40° to + 85° C

  • Manufacturers Part Number GC-XPICO-MBTCP-MB
    Characters 7 or 8 data bits
    Parity Odd, Even, None
    Stop Bits 1 or 2
    Control Signals DTR/DCD, RTS/CTS
    Programmable I/O 8 PIO pins (software selectable)
    Protocols Modbus, TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, AutoIP
    Management SNMP, Telnet, Serial, Internal Web Server, and Microsoft Windows based utility for web configuration
    Included Software None
    Data Rates 300bps to 115,200 bps
    Interface(s) Serial: CMOS (Asynchronous, 5V tolerant)
    CPU Based on the DSTni-EX Enhanced 16-bit, 48MHz or 88MHz x86 Architecture
    Memory 256KB SRAM, 512KB Flash
    Voltage Input: 3.3VDC
    Dimensions 24mm (L) x 16.5mm (W)
    Internal Web Server Storage Capacity: 384KB for Web Pages
    Connector(s) 40-pin Board-to-Board SMT Connector
    Temperature Range
    • Operating: -40ºC to 85ºC (-40ºF to 185ºF)
    • Storage:-40ºC to 85ºC (-40ºF to 185ºF)
  • Xport-MB with the lower price point of a chip solution. It is perfect for integrating industrial Ethernet connectivity onto an existing design with a serial interface, as it adds full serial port control and supports bridging for Modbus TCP, ASCII, and RTU. In contrast with the Xport-MB, the xPico-MB has more flexible mounting options using a SMT Connector and external Ethernet interface.

    Unlike a chip solution, the Xpico-MB product requires fewer engineering hours and includes a full IP stack, web server and a complete Modbus protocol bridge application.

    To evaluate both the hardware and Modbus software of the xPico-MB module, use the xPico Evaluation Kit. Just swap the included xPico module with the xPico-MB module. To evaluate just the Modbus software, the xPico-MB is used in the Net232+ Modbus RS232 Adapter.

    Grid Connect offers custom engineering services to customize the xPico-MB to your exact requirements. For more information on a custom xPico-MB solution please contact us.

    ">
  • Xport-MB with the lower price point of a chip solution. It is perfect for integrating industrial Ethernet connectivity onto an existing design with a serial interface, as it adds full serial port control and supports bridging for Modbus TCP, ASCII, and RTU. In contrast with the Xport-MB, the xPico-MB has more flexible mounting options using a SMT Connector and external Ethernet interface.

    Unlike a chip solution, the Xpico-MB product requires fewer engineering hours and includes a full IP stack, web server and a complete Modbus protocol bridge application.

    To evaluate both the hardware and Modbus software of the xPico-MB module, use the xPico Evaluation Kit. Just swap the included xPico module with the xPico-MB module. To evaluate just the Modbus software, the xPico-MB is used in the Net232+ Modbus RS232 Adapter.

    Grid Connect offers custom engineering services to customize the xPico-MB to your exact requirements. For more information on a custom xPico-MB solution please contact us.

    ">