COMbricks PROFIBUS DP Monitoring Kit with SCOPE

Part Number: GC-PB-CB-DP-SCOPE-MON-KIT

MPN: GC-PB-CB-DP-SCOPE-MON-KIT

List Price: $2,550.00
Your Price: $2,550.00

Availability: Usually ships in 5-7 business days

Quick Overview

Get 24/7 monitoring and troubleshooting of PROFIBUS DP networks with the COMbricks PROFIBUS DP Monitoring kit with SCOPE.
COMbricks PROFIBUS DP Monitoring Kit with Scope

Click on image to zoom

More Views

30 Day Returns
  • Description
  • Features
  • Specs
  • Documentation
  • Reviews
  • Q&A
  • Authorized North America Distributor Stamp

    The COMbricks PROFIBUS DP Monitoring kit with SCOPE provides 24/7 monitoring and troubleshooting of PROFIBUS DP networks. With the ProfiTrace OE built into the COMbricks Head Station, and the oscilloscope built into the DP module, this is an extremely powerful pro-active tool for remote monitoring/troubleshooting over Ethernet. The kit does not require any changes to the PLC Master program, and it does not have a PROFIBUS address. It just “sniffs” the activity on your network and lets you monitor it remotely over the network using just a web browser.

    This SCOPE monitoring kit includes the PROFIBUS live list, bar graph, Oscilloscope, statistics and email/SNMP event notification and more. In addition, there is one relay on the Head Station that can be used to turn on a light tower, or a back-up system, etc. in response to network events such as station lost, low voltage syncs ,etc. If more relays are needed, just snap in a 4 channel relay module!

    The COMbricks DP SCOPE monitoring kit is ideal for PROFIBUS DP networks with one segment (no repeaters). It can be installed anywhere on the segment provided it has room for an additional bus load (in PROFIBUS DP each segment can have 32 bus loads). The kit can also be installed at the end of the segment and act as an Active Terminator! Active terminators are advised at the end of segments so that the PROFIBUS DP Connector of the last device can be removed without losing termination. Note that PROFIBUS Terminators require power that comes from the device, so when the cable is removed from the last device to do service or maintenance, termination is lost.

    If there is more than one segment on the network, then additional SCOPE cards can be added. Up to 10 segments with SCOPE can be monitored with one COMbricks system. The SCOPE kit can be used on networks with more than segment without adding additional scope cards, however the Oscilloscope and Bar Graph functions will only work for the devices on segment to which the kit is attached. The devices on the other segments can still be monitored on the Live List and Statistics, but there will be no scope images for those devices.


    Learn more about the COMbricks product family.

  • Comes complete with 1 Head Station Type 1C and 1 1-channel PROFIBUS DP SCOPE module.

    • Automatically detects the baud rate of the network.
    • Termination Switch.
    • Up to 4 PROFIBUS DP networks (with other optional modules) may be monitored.
    • DIN-rail mount.
    • 1 year warranty.

  • Manufacturers Part Number GC-PB-CB-DP-SCOPE-MON-KIT
    Backplane 4 Networks selectable with switches
    Included in Box
    • 1 COMbricks Head Station Type 1C (GC-PB-CB-HS-1C)
    • 1 COMbricks 1 Channel Scope Repeater Module (GC-PB-CB-1CH-SC)
    Power Supply Head Station: Redundant, Operating Voltage - 11..26 VDC, Backplane Current - 2.5 A
    Oscilloscope

    Frequency: 192 MS/s

    Resolution: 50 mV

    Differential Range: -6.436..6.436V

    Protocols
    • Transparent for all PROFIBUS protocols
    • 2 bits delay time
    • No address required
    • HTTP, FTP, SMTP, TELNET, SNMP, CommDTM
    Dimensions All Modules: 140 x 110 x 25 mm
    Product Weight 0.65 lb
    Baud Rate Auto Detect
    Mounting DIN Mount
    Current 200 mA consumption
    Transmission Speed 9.6 kbps up to 12 Mbps (auto detect)
    Cable Length 1200 m dependent on baud rate
    Channels
    • 31 devices per channel
    • 1DP Network per channel
    Switch Termination
    PROFIBUS Networks 4 (set by dip-switches or webserver)
    Internal Web Server Includes ProfiTrace OE
    • Status of all modules
    • Live List
    • Statistics
    • Message Recording
    • Email and log on PROFIBUS events
    • System Log
    Type Stranded or solid-core wire
    Connector(s)
    • Removable screw terminals
    • 1 DB9
    • uSD card holder for 32GB (SD and SDHC)
    • USB for firmware updates
    Temperature Range 0..60° C
  • The COMbricks PROFIBUS DP Monitoring kit with SCOPE provides 24/7 monitoring and troubleshooting of PROFIBUS DP networks. With the ProfiTrace OE built into the COMbricks Head Station, and the oscilloscope built into the DP module, this is an extremely powerful pro-active tool for remote monitoring/troubleshooting over Ethernet. The kit does not require any changes to the PLC Master program, and it does not have a PROFIBUS address. It just “sniffs” the activity on your network and lets you monitor it remotely over the network using just a web browser.

    This SCOPE monitoring kit includes the PROFIBUS live list, bar graph, Oscilloscope, statistics and email/SNMP event notification and more. In addition, there is one relay on the Head Station that can be used to turn on a light tower, or a back-up system, etc. in response to network events such as station lost, low voltage syncs ,etc. If more relays are needed, just snap in a 4 channel relay module!

    The COMbricks DP SCOPE monitoring kit is ideal for PROFIBUS DP networks with one segment (no repeaters). It can be installed anywhere on the segment provided it has room for an additional bus load (in PROFIBUS DP each segment can have 32 bus loads). The kit can also be installed at the end of the segment and act as an Active Terminator! Active terminators are advised at the end of segments so that the PROFIBUS DP Connector of the last device can be removed without losing termination. Note that PROFIBUS Terminators require power that comes from the device, so when the cable is removed from the last device to do service or maintenance, termination is lost.

    If there is more than one segment on the network, then additional SCOPE cards can be added. Up to 10 segments with SCOPE can be monitored with one COMbricks system. The SCOPE kit can be used on networks with more than segment without adding additional scope cards, however the Oscilloscope and Bar Graph functions will only work for the devices on segment to which the kit is attached. The devices on the other segments can still be monitored on the Live List and Statistics, but there will be no scope images for those devices.


    Learn more about the COMbricks product family.

    ">
  • The COMbricks PROFIBUS DP Monitoring kit with SCOPE provides 24/7 monitoring and troubleshooting of PROFIBUS DP networks. With the ProfiTrace OE built into the COMbricks Head Station, and the oscilloscope built into the DP module, this is an extremely powerful pro-active tool for remote monitoring/troubleshooting over Ethernet. The kit does not require any changes to the PLC Master program, and it does not have a PROFIBUS address. It just “sniffs” the activity on your network and lets you monitor it remotely over the network using just a web browser.

    This SCOPE monitoring kit includes the PROFIBUS live list, bar graph, Oscilloscope, statistics and email/SNMP event notification and more. In addition, there is one relay on the Head Station that can be used to turn on a light tower, or a back-up system, etc. in response to network events such as station lost, low voltage syncs ,etc. If more relays are needed, just snap in a 4 channel relay module!

    The COMbricks DP SCOPE monitoring kit is ideal for PROFIBUS DP networks with one segment (no repeaters). It can be installed anywhere on the segment provided it has room for an additional bus load (in PROFIBUS DP each segment can have 32 bus loads). The kit can also be installed at the end of the segment and act as an Active Terminator! Active terminators are advised at the end of segments so that the PROFIBUS DP Connector of the last device can be removed without losing termination. Note that PROFIBUS Terminators require power that comes from the device, so when the cable is removed from the last device to do service or maintenance, termination is lost.

    If there is more than one segment on the network, then additional SCOPE cards can be added. Up to 10 segments with SCOPE can be monitored with one COMbricks system. The SCOPE kit can be used on networks with more than segment without adding additional scope cards, however the Oscilloscope and Bar Graph functions will only work for the devices on segment to which the kit is attached. The devices on the other segments can still be monitored on the Live List and Statistics, but there will be no scope images for those devices.


    Learn more about the COMbricks product family.

    ">
You might be interested in