ComBricks RS485-Intrinsic Safety Scope Repeater

Part Number: GC-PB-CB-IS-485

MPN: 101-201410C

List Price: $675.00
Your Price: $675.00

Availability:

  • Usually ships in 5-7 business days :
  • Returns Not Accepted

ComBricks RS485-IS Scope Repeater Image

Click on image to zoom

More Views

Expert Support
  • Description
  • Features
  • Specs
  • Documentation
  • Reviews
  • Q&A
  • Authorized North America Distributor Stamp

    The ComBricks RS485 is an Intrinsic Safety (IS) barrier that is used in potentially explosive atmospheres. This module offers the most advanced technology to remotely monitor IS segments over Ethernet and remain in the safe zones. The permanent mounting of the barrier allows the user to avoid contact after installation preventing hot permits or additional paperwork that would otherwise be necessary. It is intended to be installed outside the hazardous zones or in enclosed protection.

    The RS485-IS complies with specification for PROFIBUS DP in IS while driving 31 RS485-IS devices. ProfiTrace and an Oscilloscope are also integrated for Intrinsic Safety.


    Returns Not Accepted
    All modules are certified for use in EX zones, and the chain of control between the Manufacturer and Authorized Distributor must be maintained at all times. Once a module is sold to an end customer, the chain of control is broken, and the module can not be resold to another customer - even in the case of unopened/unused products.

    • Used in potentially explosive atmospheres
    • Used to remotely monitor from safe zones
    • Transparent for all PROFIBUS protocols


    ATEX Electrical

    • Uo = 4.2 V
    • Io = 149 mA
    • Ui ≥ 4.2 V
    • Li ≈ 0 μH
    • Ci = Negligibly small
    • Output characteristic: Linear


    ATEX Compliance

    • II (2) G [Ex ia Gb] IIC
    • EN-IEC60079-0: 2012
    • EN-IEC60079-11: 2012
    • EN-IEC60079-25: 2010
    • Certification number: DEKRA 12ATEX0192
    • Compliant with the PNO RS 485-IS Installation Guidelines V1.1

  • Manufacturers Part Number 101-201410C
    Backplane
    • 4 Networks selectable with switches
    • 10 Modules (positioned in the first 10 slots)
    • 450 mA current consumption
    Oscilloscope
    • Frequency: 192 MS/s
    • Resolution: 27 mV
    • Differential Range: -3.49.. +3.49 V
    Protocols
    • Transparent for all PROFIBUS protocols
    • 9.6 kbps - 1.5 Mbps (auto detection)
    • 2 bits delay time (12 bits in redundant mode)
    • No address required
    • Bus redundancy (selectable)
    Voltage

    ATEX Electrical

    • Uo = 4.2 V
    • Io = 149 mA
    • Ui ≥ 4.2 V
    • Li ≈ 0 μH
    • Ci = Negligibly small
    • Output characteristic: Linear
    Dimensions 120 x 103 x 25 mm
    Product Weight 150 g (5.3 oz)
    Certifications

    ATEX Compliance

    • II (2) G [Ex ia Gb] IIC
    • EN-IEC60079-0: 2012
    • EN-IEC60079-11: 2012
    • EN-IEC60079-25: 2010
    • Certification number: DEKRA 12ATEX0192
    • Compliant with the PNO RS 485-IS Installation Guidelines V1.1
    Cable Length 1200 m cable length (depends on baud rate)
    Channels
    • 1 Bus channel
    • 31 devices/bus-loads per channel
    Connector(s) 1 DB9 connector
    Temperature Range Operating Temperature : 0.6 ºC
  • The ComBricks RS485 is an Intrinsic Safety (IS) barrier that is used in potentially explosive atmospheres. This module offers the most advanced technology to remotely monitor IS segments over Ethernet and remain in the safe zones. The permanent mounting of the barrier allows the user to avoid contact after installation preventing hot permits or additional paperwork that would otherwise be necessary. It is intended to be installed outside the hazardous zones or in enclosed protection.

    The RS485-IS complies with specification for PROFIBUS DP in IS while driving 31 RS485-IS devices. ProfiTrace and an Oscilloscope are also integrated for Intrinsic Safety.


    Returns Not Accepted
    All modules are certified for use in EX zones, and the chain of control between the Manufacturer and Authorized Distributor must be maintained at all times. Once a module is sold to an end customer, the chain of control is broken, and the module can not be resold to another customer - even in the case of unopened/unused products.

    ">
  • The ComBricks RS485 is an Intrinsic Safety (IS) barrier that is used in potentially explosive atmospheres. This module offers the most advanced technology to remotely monitor IS segments over Ethernet and remain in the safe zones. The permanent mounting of the barrier allows the user to avoid contact after installation preventing hot permits or additional paperwork that would otherwise be necessary. It is intended to be installed outside the hazardous zones or in enclosed protection.

    The RS485-IS complies with specification for PROFIBUS DP in IS while driving 31 RS485-IS devices. ProfiTrace and an Oscilloscope are also integrated for Intrinsic Safety.


    Returns Not Accepted
    All modules are certified for use in EX zones, and the chain of control between the Manufacturer and Authorized Distributor must be maintained at all times. Once a module is sold to an end customer, the chain of control is broken, and the module can not be resold to another customer - even in the case of unopened/unused products.

    ">
You might be interested in