PCAN-MicroMod Analog / Digital Mix 2 Module

Part Number: GC-CAN-MICROMOD-MIX2

MPN: IPEH-002203

List Price: $349.00
Your Price: $269.00
Quantity
Price Each
You Save
2 $260.00 4%

Availability: Usually ships the same business day

PCAN-MicroMod Analog / Digital Mix 2 Module

Click on image to zoom

More Views

1 Year Warranty
  • Description
  • Features
  • Specs
  • Documentation
  • Reviews
  • Q&A
  • Authorized North America Distributor Stamp

    The MicroMod M2 Module is a packaged version of the MicroMod CPU. Since only a limited set of the Micromod's inputs and outputs can be brought out to the terminal blocks, several packaged versions are available in different configurations. The Mix 2 (M2) Version has a specific mixture of inputs and outputs. (See Features Tab)

    NOTE:
    Since the MicroMod is programmed and configured over the CAN network using the free PC software provided, a PEAK PC to CAN interface is required (sold separately). We recommend the CAN-USB adapter as the simplest interface to use for this purpose.

  • The Mix 2 (M2) Version has a specific mixture of inputs and outputs:


    7 INPUTS:

    • 2 Digital Inputs with following properties:
          - Pull-up or pull-down circuit
          - Voltage swing 5 to 18 V
          - Schmitt trigger behavior, inverting
          - Low-pass behavior
          - Parallel connection of a frequency input (for each digital input 0 to 3) for alternative use
            (e.g. at fast changes of state, or at count)
    • 2 Temperature Inputs for connection of an NTC thermistor and a platinum sensor PT1000
          - measuring range each 0 to 70 °C (32 to 158 °F)
    • 3 Analog Inputs with following properties:
          - Pull-down circuit
          - Measuring range unipolar, 0 to 5 V
          - Measuring range extension possible
          - Protection against under voltage and over voltage


    3 OUTPUTS:

    • 1 Digital Output with following properties:
          - fast low-side switches, max. 55 V, 0.75 A
          - Short circuit protection
    • 1 Analog Output with following properties:
          - Voltage 0 to 10 V using PWM at a resolution of 16 bits
          - Load ability: 15 mA, short-circuit proof
    • 1 Analog Output with current intensity 0 to 20 mA using PWM at a resolution of 16 bits

    Status LEDs for power supply and digital outputs

  • Manufacturers Part Number IPEH-002203
    Connector Type No
    Indicators (LED) Power Supply & Digital Outputs
    Inputs
    • 2 Digital Inputs with following properties:
          - Pull-up or pull-down circuit
          - Voltage swing 5 to 18 V
          - Schmitt trigger behavior, inverting
          - Low-pass behavior
          - Parallel connection of a frequency input (for each digital input 0 to 3)
            or alternative use (e.g. at fast changes of state, or at count)
    • 2 Temperature Inputs for connection of an NTC thermistor and a platinum
            sensor PT1000
          - measuring range each 0 to 70 °C (32 to 158 °F)
    • 3 Analog Inputs with following properties:
          - Pull-down circuit
          - Measuring range unipolar, 0 to 5 V
          - Measuring range extension possible
          - Protection against under voltage and over voltage
    Outputs
    • 1 Digital Output with following properties:
          - fast low-side switches, max. 55 V, 0.75 A
          - Short circuit protection
    • 1 Analog Output with following properties:
          - Voltage 0 to 10 V using PWM at a resolution of 16 bits
          - Load ability: 15 mA, short-circuit proof
    • 1 Analog Output with current intensity 0 to 20 mA using PWM at a
            resolution of 16 bits

  • The MicroMod M2 Module is a packaged version of the MicroMod CPU. Since only a limited set of the Micromod's inputs and outputs can be brought out to the terminal blocks, several packaged versions are available in different configurations. The Mix 2 (M2) Version has a specific mixture of inputs and outputs. (See Features Tab)

    NOTE:
    Since the MicroMod is programmed and configured over the CAN network using the free PC software provided, a PEAK PC to CAN interface is required (sold separately). We recommend the CAN-USB adapter as the simplest interface to use for this purpose.

    ">
  • The MicroMod M2 Module is a packaged version of the MicroMod CPU. Since only a limited set of the Micromod's inputs and outputs can be brought out to the terminal blocks, several packaged versions are available in different configurations. The Mix 2 (M2) Version has a specific mixture of inputs and outputs. (See Features Tab)

    NOTE:
    Since the MicroMod is programmed and configured over the CAN network using the free PC software provided, a PEAK PC to CAN interface is required (sold separately). We recommend the CAN-USB adapter as the simplest interface to use for this purpose.

    ">
You might be interested in