The IP7-SS20 model features a powerful 20 Watt Audio Amplifier for High Output
or Multiple Speaker paging zones. Using the free TalkMaster™ LE
Software running on a PC, you can play prerecorded tones and announcements (.wav
format) or use the PC's microphone to make live announcements. The
IP7-SS20 is ideal for public address and paging applications.
Each IP7-SS20 powers a zone of multiple speakers or a high output horn.
It has a Class D amplifier design for clear, crisp audio. The SS20
also has Short Circuit and Thermal Protection and is powered by a 24VAC power
source. There is also an 8-watt version available the IP7-SS8, which
is powered by PoE (Power of Ethernet) for simple installation and wiring.
With the optional audio transformer, you can drive one or more speakers attached to a 25/70V distribution line. All speakers must have their own 25/70V transformer. This allows the IP7-SS20 to be located further away (up to 3000 feet with 18 guage wire) from the speaker(s). It also allows an individual speaker's volume to be adjusted using the transformer taps. When using the transformer, the speakers must be wired in parallel.
IP Intercom and paging systems can be designed with any
combination of intercom endpoints:
Wall/Surface Mount Models,
Call Station etc. There are two types of IP
Intercom systems, paired, or console based.
For paired systems, two endpoints can be
configured as paired point-to-point units. These two intercoms can talk to
each other from anywhere in the world over the Internet. They are
configured using the free TalkMaster™
LE Software running on a PC, and once set-up,
the PC is removed, and the two endpoints will forever talk to each other
exclusively. You can change the configuration later by running TalkMaster
again. You can have an unlimited number of paired intercoms on the
same network - they
will not interfere with each other.
Console Based Systems
A console based system, has one or more
PC Consoles, communicating with any number of endpoints. Different
software is needed to run a single-console system versus a
Single-console systems can be
implemented using TalkMaster LE Software that comes free with the purchase of any
intercom or paging unit.
single-console systems utilizes a PC running Talkmaster LE Software to
communicate with IP Intercom/Paging Endpoints. This is a "virtual" star
configuration, where all endpoints (intercoms or paging units) report to the console. The console can
communicate with any endpoint using the PC's speaker and microphone.
Using the Talkmaster GUI (Graphical User Interface), the console operator can
initiate or receive calls to/from endpoints. The operator is
notified of waiting calls, and customized "please wait" messages can be created
for calls waiting in queue. The console operator may also select groups of
intercoms and paging units to broadcast a message (for paging or public address). TalkMaster LE software
can be loaded on any number of PC's, so the Console can move from one PC to
another. In addition, a "warm-standby" can be configured, so that console
control can be passed back and forth between two PC's with ease.
Multi-console systems require the
purchase and installation of TalkMaster™ Enterprise Edition (EE) software.
This advanced software allows for multiple, simultaneously active consoles.
A server is required to host the Talkmaster-EE Application. This
system features real-time call handling, using rules-based queue management.
Intercom queues are groups of intercoms that may be assigned to human console
operators acting in management teams. To assure service quality, TalkMaster-EE
incorporates a powerful set of rules-based controls to handle incoming call
counts, waiting time in queue and call priorities. By applying these rules, the
TalkMaster-EE Administrator is able to establish call response hierarchies for
virtually any organizational requirement.
Typical IP7-SS20 Applications:
- Paired point-to-point with a wall model or desk model (ii3-EDW)
to provide a single paging zone.
- Used for a paging zone in a multi-paging zone/intercom application. In this type of design, a PC Master Console
(TalkMaster LE) or Multiple PC Consoles (TalkMaster EE) can control and communicate with a single selected end-station intercom or paging units, to groups of intercoms/paging units all at once, or to all intercoms and paging units in the
installation at the same time.